Fujitsu DX400 Computer Drive User Manual


 
Chapter 5 Configuration Menu
> 5.1 Resource Domain Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
98
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
This section explains [Set Resource Domain] procedures.
The following settings are available.
Create Resource Domains
Rename Resource Domain
Delete Resource Domains
Procedures for each operation are described below.
5.1.1.1 Create Resource Domains
This section explains procedures for creating Resource Domains.
Procedure
1 Click [Set Resource Domain] under the Resource Domain Management in the
[Configuration] menu.
The [Set Resource Domain (Resource Domain List)] screen appears.
2 Click the [Create] button.
(This screen is displayed when logged on the ETERNUS DX400/DX8000 series in which
the Resource Domains are registered using a Total Administrator account.)
The [Set Resource Domain (Create Resource Domains)] screen appears.
Refer to "A.7.1 Set Resource Domain (Create Resource Domains) Screen" (page 703)
for screen details.
Up to eight Resource Domains can be created per ETERNUS DX400/
DX8000 series.
After creating Resource Domains, set the maximum number of
assignable resources using the [Assign Numerical Resource] menu.
After creating Resource Domains, assign each resource to Resource
Domains using the [Assign Resources] menu.
When the maximum number of Resource Domains has already been
registered in the ETERNUS DX400/DX8000 series, the [Create]
button is not displayed.