Filter
Top Products
Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
322
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
2 Select the copy source CA port of the CA-host connection information, and click
the [Copy] button.
→ The [Set CA Parameters (Copy Destination CA Port Selection)] screen appears.
3 Select copy destination CA Port(s) to which the selected CA Port connection
information will be copied (multiple selections can be made), and click the
[Paste] button.
The selected copy source CA Port is displayed with a yellow background.
→ The [Set CA Parameters (Check Copying)] screen appears.
When the [Copy] button is clicked without selecting a copy source
CA Port, an error screen appears.
• If the CA type is FC, the settings can be copied only when the
port has the same RA mode (FC-CA/FC-RA/RFCF-RA).
However, settings cannot be copied between FC4G and FC8G.
• RFCF-EX uses the ports in pairs. The pair port of the selected
port is automatically copied with the same settings. "Pair port"
indicates Port#0 and Port#1, or Port#2 and Port#3.
• When the [Paste ] button is clicke d without selecting a copy
destination CA Port, an error screen appears.