Filter
Top Products
Chapter 5 Configuration Menu
> 5.1 Resource Domain Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
131
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
■ To select an individual Affinity Group
(1)Select the domain to assign the relevant Affinity Group from the Affinity Group List
using the list box.
(This screen is displayed when logged on the ETERNUS DX400/DX8000 series in
which the Resource Domains are registered using a Total Administrator account.)
→ The [Assign Resources (Check Affinity Group Settings)] screen appears.
The Set Range setting is performed when there is at least one
Affinity Group that satisfies the condition described in "Condition in
which an Affinity Group can Assign to Domain/Change Assigned
Domain" (page 109).
A list box is displayed for the Affinity Group where the Assigned
Domain can be changed. For Affinity Groups where the Assigned
Domain cannot be changed, domain information is displayed in
text format.
• If the total number of Affinity Groups in the domain exceeds the
maximum number specified using the [Assign Numerical
Resource] function, an error screen appears.
• When the Assigned Domain of an Affinity Group is changed,
mapping that is allocated to the relevant Affinity Group is deleted.