Filter
Top Products
Chapter 6 Settings Menu
> 6.1 Setting Configuration
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
449
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
The following explains the procedures for [Set Configuration].
Procedure
1 Click [Set Configuration] under the Setting Configuration in the [Settings] menu.
→ The [Set Configuration (Initial)] screen appears.
2 Specify the mode and configuration information to apply, and click the [Execute]
button.
Set the following items.
• Mode
Select from the following.
- Initialize
Configures the device by applying the newly created or modified configuration
information file.
- Restore
Applies the configuration information file, the same as the current configuration
information file, to the device, and restores the former device configuration.
- When the "Advanced Copy License" is not registered, but the
configuration information contains a Snap Data Volume (SDV), Snap
Data Pool Volume (SDPV), or REC Disk Buffer.
- When the "Thin Provisioning License" is not registered, but the
configuration information contains a Thin Provisioning Volume (TPV)
or Thin Provisioning Pool (TPP).
- When the "Encryption Mode" is disabled, but the configuration
information contains encrypted volumes or encrypted TPPs.
- When the REC Disk Buffer setting which related with REC Buffer in
the ETERNUS DX400/DX8000 series do not match the settings in
the configuration information.
- When the SDP capacity in the configuration information exceeds the
maximum SDP capacity available for the relevant ETERNUS DX400/
DX8000 series.
- When the configuration information contains unknown parameters.
- When the Thin Provisioning Pool (TPP) capacity in configuration
information exceeds the maximum TPP capacity available for the
relevant ETERNUS DX400/DX8000 series.
- When the Thin Provisioning Pool Settings in the configuration
information do not contain device configuration (when selecting
"Restore").
- When the configuration information contains a CM that has failed in
the ETERNUS DX400/DX8000 series.
• When logged on using a Resource Domain Administrator account, the
[Set Configuration] menu is not displayed.