Filter
Top Products
Chapter 5 Configuration Menu
> 5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
143
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
5.2 RAID Management
Under RAID setting, ETERNUS DX400/DX8000 series RAID groups and Logical Volumes are
setup.
The following can be set on this screen.
• Create RAID Group
• Rename RAID Group
• Change Controlling CM of RAID Group
• Logical Device Expansion
• Delete RAID Group
• Create Logical Volume
• Set Snap Data Pool
• Rename Logical Volume
• Convert Encryption Volume
• Format Logical Volume
• Initialize Snap Data Volume
• RAID Migration
• Progress of RAID Migration
• LUN Concatenation
• Delete Logical Volume
• Create Hot Spare
• Delete Hot Spare
• To use encryption, set the encryption mode using the [Set Encryption
Mode] menu. The following menu is not available until the encryption
mode has been set:
- Convert Encryption Volume
• To use Advanced Copy, register the Advanced Copy license using the
[Register Advanced Copy License] menu. The following menus are not
available until the Advanced Copy license has been registered:
- Set Snap Data Pool
- Initialize Snap Data Volume