Filter
Top Products
Chapter 5 Configuration Menu
> 5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
236
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
10 Click the [OK] button.
→ Returns to the [Menu] screen.
End of procedure
5.2.15 Delete Logical Volume
This function deletes the created volume(s) without stopping ETERNUS DX400/DX8000 series
operations.
• If a volume is deleted, access to the data in the volume is lost.
• If any mapping information exists at volume deletion, the mapping
information related to the deleted volume is also deleted automatically.
• Volumes in the following status cannot be deleted. If deletion of such
volumes is attempted, an error is displayed. Also, a n e r r o r i s d i s p l a y e d i f
such volumes are a part of the selected range. In t h i s c a s e , n o v o l u m e s
in the selected range will be deleted.
- Copy source and destination volumes under EC/OPC/REC
operations.
- Volumes that are set for extent setting by the bind-in-cache function.
Volumes under EC/OPC/REC operations can be checked using the
[Advanced Copy Status] menu.
• Volumes under RAID Migration cannot be deleted.
• Thin Provisioning Volumes that are being balanced cannot be deleted.
• Snap Data Pool Volumes (SDPV) cannot be deleted using the [Delete
Logical Volume] function. Use the [Set Snap Data Pool] function to
delete an SDPV.