Fujitsu DX400 Computer Drive User Manual


 
Appendix A Screen Details
> A.30 Set RAID Group-Eco-mode
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
791
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
- [Eco-mode Schedule] radio button
Specifies what is set when the Eco-mode schedule is applied to the target RAID group
(Default: Unselected).
ON/OFF only
Only whether the Eco-mode is on or off is set for the target RAID group.
Schedule only
Only the Eco-mode schedule is set for the target RAID group.
Both
Both whether the Eco-mode is on or off and the Eco-mode schedule are set for the
target RAID group.
Manual setting
- [Eco-mode Schedule (ON/OFF)] check box
Sets the Eco-mode schedule for the target RAID group to ON or OFF (Default).
If this box is checked, the Eco-mode schedule is ON. If this box is not checked, the Eco-
mode schedule is OFF.
- [Eco-mode Schedule (Schedule)] list box
Specify the Eco-mode schedule of the target RAID Group.
Default: "None".
Not displayed for the RAID group, other than Open, SDV, or
SDPV.
Not displayed for RAID Groups that are configured with SSD.
Not displayed for RAID Groups that are configured with system
disks.
Not displayed for RAID Groups that are registered as a REC Disk
Buffer.
Not displayed for the RAID group, other than Open, SDV, or
SDPV.
Not displayed for RAID Groups that are configured with SSD.
Not displayed for RAID Groups that are configured with system
disks.
Not displayed for RAID Groups that are registered as a REC Disk
Buffer.
If the Storage Foundation Software ETERNUS SF manages the
Eco-mode, "External" management is displayed for the relevant
RAID Groups.
When Resource Domains are registered in the ETERNUS
DX400/DX8000 series, only the Eco-mode schedules that are
assigned to the same Resource Domain as the relevant RAID
Group and the Shared Resource, are displayed in the list box.