Filter
Top Products
Chapter 6 Settings Menu
> 6.3 Advanced Copy Settings
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
455
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
6.3.1 Set EC/OPC Priority
This function sets the copy execution speed for the Equivalent Copy (EC) and One Point Copy
(OPC).
The EC/OPC speed is usually set in consideration of the host's I/O load and the load of the copy
processing. The set speed of EC/OPC becomes effective when the next session is begun.
The following explains the operating procedures of Set EC/OPC Priority.
Procedure
1 Click [Set EC/OPC Priority] under the Advanced Copy Settings in the [Settings]
menu.
→ The [Set EC/OPC Priority (Initial)] screen appears.
2 Select priority, and click the [Set] button.
→ The [Set EC/OPC Priority (Setting Check)] screen appears.
3 Click the [OK] button.
→ The [Set EC/OPC Priority (Setting Result)] screen appears.
In order to use EC or OPC, the purchase of a license is required. Register
necessary information by using the [Register Advanced Copy License]
function after purchasing an Advanced Copy license. Copy related menus
other than [Register Advanced Copy License] is not available until the
license has been registered.