Filter
Top Products
Appendix A Screen Details
> A.25 Set REC Priority
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
775
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
A.25 Set REC Priority
A.25.1 Set REC Priority (Speed Setting) Screen
This screen displays speed information between the local device and the remote device. If you
change the setting, set appropriate values.
● Setting item
• Remote Box ID
The Box ID of the remote device is displayed.
• [Connection Type] radio button
Select a connection type between the local device and the remote device with the radio
button.
- Direct Connection: (Default)
Directly connects the local device with the remote device without using lines. Even when it
is a connection using a switch, if you don't use lines, select [Direct Connection].
- Remote Connection:
This connects the local device and the remote device via lines.
• Remote Connection
- [Volume Type] radio button
Select a volume type of the copy target (Open Volume, Mainframe Volume) using the radio
buttons.
If two types of copy target volumes coexist, select [Open Volume].
The default setting is "Open Volume".
- Link Speed
This sets the speed that is calculated by line speed and number of lines.
Set the speed from 1 – 65535 (Mbit/s).
Refer to "Calculation method of effective line speed".
When [Direct Connection] is selected, REC operates with the speed
mode specified by [Set EC/OPC Priority].
When Connection Type is [Remote Connection], this is enabled.
• When Connection Type is [Remote Connection], this is enabled.
• When it is not set or Connection Type is [Direct Connection], [0
(Mbit/s)] is displayed.