Filter
Top Products
Appendix C Syslog Message List
> C.2 Syslog Message List
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
830
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
C.2.3 Warning Messages
This section describes the messages that are sent when the severity is Warning.
■ Meaning of symbols
The following symbols are used in the Warning Message List. These symbols are described in
italics.
Symbol Meaning
# System 0 or System 1
$
Sensor number (0
– 1)
&
Slot number (0
– 1)
*
Slot number (0
– 7)
BB
BRT Module ID (B0 – B7)
c Capacity (2: 1GB, 4: 2GB, 8: 4GB)
CC
CA Module ID (40 – 7F)
ccccccc Usage (Data Disk, Spare, System Disk)
EE
SVC Module ID (E0
– E1)
ee Factor (00: Path error, 01: Highly-loaded, 02: ERROR)
FF
FRT Module ID (F0
– F1)
GG DE-ID (hexadecimal)
hh
Factor (00
– FF)
kk DE with the smallest number
LL FRT/BRT Module ID
MM
CM Module ID (10
– 11)
mm CM Module ID in which Pinned data occurs (hexadecimal)
n
BAD data counter (Lap counter of 0
– f)
NN
CM Module ID (10
– 17)
PP..PP Product ID of Disk
ppp TPP number (hexadecimal)
ss Slot number (hexadecimal)
SS Usage (code)
uu CA Module ID (hexadecimal)
ww CA type
x HW type (device type)
xx HW type (device type)
XX
ID of CM Module in which CA is installed (10
– 17)
xxx RAID Group number (hexadecimal)
yy Port number
YYYY Component name of CA
YYYY/MM Expiration date
z
Number of days (1
– 6)