Filter
Top Products
Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
404
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
5.4.8.1 Add Host Response
This section explains procedures to add Host Response.
Procedure
1 Click [Set Host Response] under the Host Interface Management in the
[Configuration] menu.
→ The [Set Host Response (Initial)] screen appears.
Refer to "A.22.1 Set Host Response (Initial) Screen" (page 764) for screen details.
2 Specify the following and click the [Add] button.
• Add: Host Response#
As yet unused ETERNUS DX400/DX8000 series Host Response number(s) are
displayed as options in the list box.
If adding Host Response, please select a number to assign to the Host Response you
are adding.
• Name
In the text box, enter the name to give to the Host Response you are adding.
Names already in use cannot be assigned. Entering a name is not mandatory.
• Assignable Resource Domain No.
Select the Resource Domain to be assigned to the new Host Response from the list
box.
The [Assignable Resource Domain No.] is only displayed when logged on the
ETERNUS DX400/DX8000 series, in which the Resource Domains are registered,
using a Total Administrator account.
→ The [Set Host Response (Detailed Setting)] screen appears.
Refer to "A.22.2 Set Host Response (Detailed Setting) Screen" (page 766) for screen
details.
When the [Add] button is clicked without selecting [Add: Host
Response #], an error screen appears.