Filter
Top Products
Appendix A Screen Details
> A.18 Set CA Parameters
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
743
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
• Transfer Rate
Select a Transfer Rate for the FC-CA Port from the list box.
- For FC4G
• 4G/2G/1Gbit/s Auto: Selects the transfer rate automatically. (Default)
• 4Gbit/s: Sets the transfer rate to 4Gbit/s.
• 2Gbit/s: Sets the transfer rate to 2Gbit/s.
• 1Gbit/s: Sets the transfer rate to 1Gbit/s.
- For FC8G
• 8G/4G/2Gbit/s Auto: Selects the transfer rate automatically. (Default)
• 8Gbit/s: Sets the transfer rate to 8Gbit/s.
• 4Gbit/s: Sets the transfer rate to 4Gbit/s.
• 2Gbit/s: Sets the transfer rate to 2Gbit/s.
• Affinity Mode
Select whether the Host-Affinity function of the FC-CA Port is ON (Enabled) or OFF
(Disabled) using the radio buttons.
- ON:
Enables the Host-Affinity function of the FC-CA Port.
In this case, [Set LUN Mapping] is disabled and the Host-Affinity function is enabled for the
FC-CA Port.
- OFF: (Default)
Disables the Host-Affinity function of the FC-CA Port.
In this case, [Set LUN Mapping] is enabled and the Host-Affinity function is disabled for t h e
FC-CA Port.
• Host Response
Select the appropriate Host response from the list box depending on the host connected to
the FC-CA Port. When clicking the [Host Response List] link, the Host Responses
t h a t c a n b e
set are
displayed.
- Default: Name (initial status):
The [Default] Host Response is displayed. If the Host Response Name is registered, the
name is also displayed in the list box.
- Host Response (Number: Name):
A Host Response identification number is displayed. I f t h e H o s t R e s p o n s e N a m e i s
registered, the name is also displayed in the list box.
(Number = 0x01 – 0x0FF)
Current transfer rate setting can be checked in the "Link Status"
column on the CA details screen (FC) under the [Device Status]
menu.
• This setting is enabled only when the [Affinity Mode] is [OFF
(Disabled)].
• When logged on using a Resource Domain Administrator account,
only the Host Responses that are assigned to the relevant Resource
Domain, and only the Host Responses that are assigned to the
Shared Resource, are displayed in the list box as options.