Filter
Top Products
Appendix A Screen Details
> A.36 Set Remote Support
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
805
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
• Device Mail Address
- SMTP Server (Required)
Input the IP address or the domain name of the SMTP server used by the REMCS
operation.
Up to 63 alphanumeric characters and symbols can be entered.
- Port No. (Required)
Input the port number that the SMTP server uses.
Numerals between 1-65535 can be entered. The default setting is "25".
- Sender E-Mail (Required)
Input the source E-Mail address that the device uses for REMCS operation.
Up to 63 alphanumeric characters and symbols can be entered.
• SMTP Auth Information
- Auth Type
Select the type of the SMTP Authentication.
• Without SMTP-AUTH (default setting)
• POP Before SMTP-AUTH
• SMTP-AUTH
- SMTP-AUTH Type (When using SMTP-AUTH only)
Select the method of SMTP Authentication.
• AUTO (default setting)
• CRAM-MD5
• PLAIN
• LOGIN
- POP Server (When using POP Before SMTP-AUTH only)
Input the domain name or IP address of POP server to connect at the time of SMTP
Authentication.
Up to 63 alphanumeric characters and symbols can be entered.
- Port No.
Input the port number to use when you communicate with POP server at SMTP
Authentication. Normally, "110" is used.
Numerals between 1 – 65535 can be entered.
- User Name
Input the user ID when accessing POP server.
Up to 31 alphanumeric characters and symbols can be entered.
- Password
Input the password when accessing POP server.
Up to 31 alphanumeric characters and symbols can be entered.
This item is available only when selecting "POP Before SMTP-
AUTH" or "SMTP-AUTH" at Auth Type.
This item is available only when selecting "POP Before SMTP-
AUTH" or "SMTP-AUTH" at Auth Type.