Filter
Top Products
Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
442
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
2 Select the CA Port to copy RA mode (Copy Source), and click the [Copy] button.
→ The [Switch RA Mode (Copy Destination CA Selection)] screen appears.
3 Select Copy Destination CA Port (multiple selections can be made), and click
the [Paste] button.
The copy source CA Port is displayed with a yellow background.
→ The [Change RA Mode (Copy Check)] screen appears.
• When the [Copy] button is clicked without selecting CA, an error
screen appears.
• If the [Copy] button is clicked when the R F C F - R A p o r t c a n n o t b e
copied, an error screen appears.
• When the copy source is FC4G-CA Port, checkboxes are not
displayed for FC8G-CA Ports.
• When the copy source is FC8G-CA Port, checkboxes are not
displayed for FC4G-CA Ports.
• When the RA mode is changed from "CA" to "RA" or "RFCF-RA"
using the copy function, the mapping information will be deleted.
When changing the CA Port Mode of a live CA Port, it is
necessary to stop the host access to the CA Port to be changed.