Filter
Top Products
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
14
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
Chapter 1 Operation Screens
The ETERNUSmgr backend program, which is embedded in the ETERNUS DX400/DX8000
series
, is used to display the status of, setup and maintain the ETERNUS DX400/DX8000 series.
This chapter describes how this may be done.
1.1 Initial Screen
When using an ETERNUS DX400/DX8000 series, you must always keep a careful watch on its
status to monitor the device. Use either the ETERNUSmgr frontend or other operation manage
-
ment software. To start the initial screen, you should take different procedure, depending on the
monitoring method.
Two methods to manage ETERNUS DX400/DX8000 series are explained
in this guide. One is via the ETERNUSmgr frontend, and the other is to use
a Web browser to access the ETERNUSmgr backend program embedded
in the device.
Hereafter, "ETERNUSmgr" is generally used for all device management,
even those that use an ordinary Web browser.