Filter
Top Products
Appendix A Screen Details
> A.6 Advanced Copy Status
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
688
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
A.6 Advanced Copy Status
A.6.1 Advanced Copy Status (EC Session List) Screen
This screen displays status of EC sessions.
When Resource Domains are registered in the ETERNUS DX400/DX8000 series, the displayed
EC sessions differ depending on the current user account. When logged on using a Total Admin
-
istrator account, all the active EC sessions are displayed. When logged on using a Resource
Domain Administrator account, the active EC sessions in the ETERNUS DX400/DX8000 series
in which the copy source or copy destination volume is registered in the relevant Resource
Domain, Shared Resource, or volumes that cannot be assigned to Resource Domains, are dis
-
played.
When Resource Domains are not registered, all the active EC sessions are displayed.
■ EC Session List
● Displayed contents
• SID
The session ID is displayed in 0x0000 – 0xFFFF (hexadecimal).
Clicking the [SID] link displays the [EC Session Details] screen. However, when [Reserve] is
displayed for [Status], a link is not displayed.
• Type
Relevant session type is displayed.
- EC: EC session.
- MON: Monitoring session. (*1)
*1: Monitoring session is used to estimate the updated data size.
The updated data size is displayed on [Completed Block]. Since the Monitoring session only
exists on the copy source and not on the copy destination, a hyphen [-] is displayed in the [To
Vol.] field.
• Generation
[-] (hyphen) is displayed.
• Status
The status of the session is displayed.
- Reserve: Session ID is reserved.
- Active: Operating normally
- Error: Interruption due to error
- Suspend: Interruption by command from the host
• Error Code
The error code of the session is displayed in 0x00 – 0xFF (hexadecimal).
However, when the [Status] is [Reserve], the field is blank.