Filter
Top Products
Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
385
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
3 Select copy destination CA Port(s) (multiple selections can be made), and click
the [Paste] button.
The copy source CA Port is displayed with a yellow background.
→ The [Allocate Host-Affinity Group (Copy Check)] screen appears.
• The Host-Affinity function can be used if the [Affinity Mode] of the
target FC-CA Port or iSCSI-CA Port is [ON (Enabled)]. A
checkbox is displayed only on the FC-CA or iSCSI-CA Ports for
which [Affinity Mode] is [ON (Enabled)] as a copy destination.
• When the [Copy] button is clicked without selecting a CA Port, an
error screen appears.
• When the [Paste ] button is clicke d without selecting a copy
destination CA port, an error screen appears.
• When using the copy function, the copy destination CA and the
copy source CA must be the same type.
• When Resource Domains are registered in the ETERNUS
DX400/DX8000 series, copy results differ depending on the
current user account.
- When logged on using a Total Administrator account, the
ETERNUS DX400/DX8000 series deletes all the Host-Affinity
Groups in the copy destination CA port, and copies all the
Host-Affinity Groups in the copy source CA port to the copy
destination.