Filter
Top Products
Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
318
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
[iSCSI Setting]
- iSCSI Name
The iSCSI Name of the iSCSI-RA Port is displayed.
- Alias Name
Specify the Alias Name of the iSCSI-RA Port.
[Transfer Rate]
Set the transfer rate of the iSCSI-RA Port.
- Auto-negotiation
- 1Gbit/s Full duplex/Half duplex auto-setting
- 1Gbit/s Full duplex
- 100Mbit/s Full duplex/Half duplex auto-setting
- 100Mbit/s Full duplex
• Clicking the [ping] link of the [IP Address] field enables you to
check if the IP Address is assigned properly or if the connection
path to the destination device is operating normally.
After entering the destination device IP Address for which you
wish to check the connection status in [Ping IP Address] and
specifying the number of "Ping" commands to ex ecute in [Ping
Count], click the [Execute] button ([Set CA Parameters (Ping
Setting)] screen).
• When the Execution Result screen appears, check the results
([Set CA Parameters (Ping Execution Result)] screen).