Filter
Top Products
Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
428
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
3 Select LCU to be allocated to the CU Logical Address, and click the [Set] button.
→ The [Set IOA Mapping (LCU Selection)] screen appears.
4 Click the [LCU#] link to set IOA Mapping.
→ The [Set IOA Mapping (Setting)] screen appears.
• Up to 16 LCUs per port can be used for host interfaces. For
ETERNUS DX8400/DX8700, select the 16 LCUs to be used from
the maximum 32 LCUs available, and allocate them to CU Logical
Addresses. The registered LCUs are displayed in the [LCU#] list
box. CU Logical Addresses must also be allocated in the
ETERNUS DX8100, which has a maximum 16 LCUs available.
• IOA Mapping information is deleted for LCUs that are deallocated
from CU Logical Addresses.
[CU Logical Address] is only displayed on arrival from the screen in
Step 3.
A yellow background indicates a CU Logical Address with an added
or changed LCU.