Filter
Top Products
Chapter 6 Settings Menu
> 6.8 Others
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
603
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
■ The [OK] button is displayed under the following conditions:
• Network address (IP Address or Subnet Mask) of the device (REMCS Port) is changed
• IP Access Settings are changed
• Service Settings are changed, and so on
→ Returns to the [Menu] screen.
End of procedure
6.8.2.2 Delete REMCS Port Settings
Procedure
1 Click [Set IP Address for REMCS Port] under the Others in the [Settings] menu.
→ The [Set IP Address for REMCS Port (Initial)] screen appears.