Filter
Top Products
Chapter 6 Settings Menu
> 6.8 Others
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
593
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
• For security, when Storage Foundation Software ETERNUS SF
(such as ETERNUS SF Storage Cruiser) is not used, select
[Disable] for the "Maintenance Port" and the "Maintenance
Secure Port" in the Service Settings.
• When using the Storage Foundation Software ETERNUS SF via
the "Maintenance Secure Port", Storage Foundation Software
ETERNUS SF requires functions to send and receive encrypted
communication data.
• When clicking the [Set] button in the following conditions, an error
screen appears
- When entering characters other than numeric characters, or a
value that exceeds the maximum value to the column of the
setting item
- When required items are not set
- When settings are not 0 Byte (not set) or 4 Byte (set) in each
item
- When the Primary DNS has not been set and Secondary DNS
has been set
- When the DNS is outside of the subnet for the IP Address and
the gateway has not been set
- When either the Network Address or the Subnet Mask has
been set for the IP Access Settings
- When the Network Address of IP Access Settings has been
set and Gateway is not set
- When the IP Address, Gateway, DNS, or the Network Address
of the IP Access Settings is local host address
- When the IP Address, Gateway, DNS, or the Network Address
of the IP Access Settings is not Class A, B, or C
- When "255.255.255.255" or "0.0.0.0" is set as a Subnet Mask
- When the IP Address is the same as the Network Address or
the broadcast address
- When the IP Address of USER Port is the same as the IP
Address of REMCS Port
- When the IP Address of USER Port and IP Address of
REMCS Port are in the same subnet
- When the broadcast address of the USER port and Gateway
are the same
- When the broadcast address of the USER port and DNS
(Primary DNS and/or Secondary DNS) are the same
- When the Gateway has been set, and the IP Address and the
Gateway are in the same subnet
- When the Gateway has been set, and the IP Address and the
Gateway are not in the same subnet
- When the Network Address of IP Access Settings and the IP
Address of USER Port are in the same subnet
- When the Network Address of IP Access Settings and the IP
Address for [Set IP Address for REMCS Port] are the same