Filter
Top Products
Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
316
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
(2)Click the [OK] button.
→ The [Set CA Parameters (Updating Configuration Information)] screen appears.
When the process is successfully completed, the [Set CA Parameters (iSCSI-CA
Detailed Settings Result)] screen appears.
When the Affinity Mode is [OFF], and the Host Response that can
use up to 512 L UNs (0x000 – 0x1FF) (*1) is changed to the Host
Response that can only use up to 256 LUNs (0x000 – 0x0FF) (*2),
the LUN mappings allocated for iSCSI-CA Port (0x100 – 0x1FF) is
deleted.
*1: Indicates the following Host Specific Modes:
AIX Mode (Extended Address), HP-UX Mode (SCC), or Linux/
NR1000V Mode (Extended Address)
*2: Indicates the following Host Specific Modes:
Normal Mode (Default) or AIX Mode
For the iSCSI-CA Ports where LUN mapping will be deleted, the
[LUN Mapping] link is displayed in the [Affinity Mode] field. Clicking
the link displays the LUN mapping. LUN map pings to be deleted
(0x100 – 0x1FF) is displayed with a yellow background.
When the Affinity Mode is [OFF], the selected Host Response is
displayed in the [Affinity Mode] field. Clicking the link enables you to
check the details of the Host Response.