Filter
Top Products
Chapter 5 Configuration Menu
> 5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
216
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
■ Restrictions during RAID Migration
The migration source and destination volumes cannot both be used for the following operations.
Not Available: Functions that cannot be used
−: Functions that are not supported
*1: When these operations are performed during migration, an error occurs and the RAID Migration is
stopped.
Operation Migration Type
Open → Open Open → TPV TPV → Open TPV → TPV
Setting Advanced
Copy session
Not Available Not Available Not Available Not Available
Setting Remote
Advanced Copy
session
Not Available Not Available Not Available Not Available
Formatting volumes
Not Available
(*1)
Not Available
(*1)
Not Available
(*1)
Not Available
(*1)
LUN Concatenation
Not Available Not Available
TPV is not
supported
Not Available
TPV is not
supported
–
Encryption
Not Available Not Available
TPV is not
supported
Not Available
TPV is not
supported
–
Expanding TPV
capacity
– Not Available
Open is not
supported
Not Available
Open is not
supported
Not Available
Balancing TPV
– Not Available
Open is not
supported
Not Available
Open is not
supported
Not Available
Deleting volumes Not Available Not Available Not Available Not Available
Preventive
Maintenance of disks
Not Available Not Available Not Available Not Available
Changing Controlling
CM of RAID Group
Not Available Not Available Not Available Not Available
Changing Resource
Domain of RAID
Group
Not Available Not Available Not Available Not Available
Concurrent
firmware loading
Not Available Not Available Not Available Not Available
Reducing Advanced
Copy Table Size
Not Available Not Available Not Available Not Available
Set Configuration
(Restore mode)
Not Available
(*1)
Not Available Not Available
(*1)
Not Available
CM Hot Expansion Not Available Not Available Not Available Not Available