Fujitsu DX400 Computer Drive User Manual


 
Appendix A Screen Details
> A.2 Resource Domain List
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
671
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
A.2 Resource Domain List
A.2.1 Resource Domain List (Initial) Screen
A list of the Resource Domains is displayed.
When Resource Domains are registered in the ETERNUS DX400/DX8000 series, the displayed
Resource Domain information differs depending on the current user account.
When logged on using a Total Administrator account, all the Resource Domain information regis-
tered in the ETERNUS DX400/DX8000 series is displayed. When logged on using a Resource
Domain Administrator account, only the information of the relevant Resource Domain is dis
-
played.
Resource Domain List
Displayed contents
Resource Domain No.
The Resource Domain number (0x00 – 0x07) for the relevant Resource Domain is displayed.
Resource Domain Name
The Resource Domain name for the relevant Resource Domain is displayed within 16 charac-
ters.
If a Resource Domain name is not specified, the field is blank.
Status
The status of the relevant Resource Domain is displayed with a LED image and text.
Resource Domain status is determined by combined status of management target resource
and other Shared Resources (example: CM and CA) for each Resource Domain.
Refer to "3.1 Device Status" (page 43) for the meaning of status.
TPPs
The number of Thin Provisioning Pools assigned to the relevant Resource Domain using the
[Assign Resources] menu is displayed in decimal numbers.
RAID Groups
The number of RAID Groups assigned to the relevant Resource Domain is displayed in deci-
mal numbers.
When a Thin Provisioning Pool is assigned to a Resource Domain, RAID Groups registered in
the Thin Provisioning Pool are also assigned to the same Resource Domain. In the [RAID
Groups] field, the total number of RAID Groups that are directly assigned to the Relevant
Resource Domain using the [Assign Resources] function, and the total number of RAID
Groups in the Thin Provisioning Pool that are assigned to the relevant Resource Domain
using the [Assign Resources] function, are displayed.