Filter
Top Products
Chapter 6 Settings Menu
> 6.6 Remote Advanced Copy Configuration
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
580
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
6.6.3 Set Advanced Copy Path
Using this function, the Path Configuration file created by the [Create Advanced Copy Informa-
tion] function is used to setup the local device. When t he Path Configur ation file does not include
the local device path, the local device path information is initialized. If the path configuration is
changed using the [Set Advanced Copy Path] function, the change takes effect as soon as the
setting is made to the device.
The Advanced Copy Path configuration file must be saved within one
minute from the time the [Save] button is clicke d. If the down load dialog box
is left open for over a minute, the download operation may be terminated
with an unsuccessfully downloaded file.
If the downloaded file cannot be opened, the download has failed, try the
download again.
• When the local device information (Local Box ID) is mistaken, a "target
device is not present" error is displayed. The Local Box ID cannot be
edited using the [Create Advanced Copy Information] function. If the
Local Box ID is mistaken, delete the local device using the [Create
Advanced Copy Information] "Delete Storage System" function, and re-
create the Path Configuration file.
• When the local device information (Local Adaptor information) is
mistaken, an error to this effect is displayed. Local adaptor information
can be edited using the [Create Advanced Copy Information] function. If
the Local Adaptor information is mistaken, re-edit the Path Configuration
file using the [Create Advanced Copy Information] "Edit Adaptor
Information" function.
• When the Box ID of a device whose Path Configuration file has already
been set is changed, Remote Advanced Copy (REC) can no longer be
executed. Remake the Path Configuration file using the new Box ID,
and update the path information setting on all affected devices.
• If a Remote Advanced Copy session is running, changing the paths
used b y the copy operation may result in Remote Advanced Copy
errors, or even cause the session to terminate. Before setting the local
device using the Path Configuration file, confirm that no Remote
Advanced Copy sessions are running.
The [Advanced Copy Status] "REC Session List" function can be used
to check whether or not a Remote Advanced Copy session is running.
• When logged on using a Resource Domain Administrator account, the
[Set Advanced Copy Path] menu is not displayed.
This function can only be used to setup the local device with a Path
Configuration file which has been created using the [Create Advanced
Copy Information] function.