Filter
Top Products
Chapter 6 Settings Menu
> 6.5 Eco-mode
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
528
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
6.5.3.2 Manual setting of Eco-mode schedule in the RAID group
This section describes operating procedure for manual setting of Eco-mode schedule in the
RAID group.
Procedure
1 Click [Set RAID Group-Eco-mode] under the Eco-mode in the [Settings] menu.
→ The [Set RAID Group-Eco-mode (Set)] screen appears.
Refer to "A.30.1 Set RAID Group-Eco-mode (Set) Screen" (page 790)
for screen
details.
2 Specify the following items in the RAID group to set the Eco-mode schedule
from the [RAID Group List].
• [Eco-mode Schedule (ON/OFF)] check box
Select ON/OFF of Eco-mode schedule to be set.
• [Eco-mode Schedule (Schedule)] list box
Select the Eco-mode schedule to be specified.
When Resource Domains are registered in the ETERNUS DX400/
DX8000 series, only the Eco-mode schedules that are assigned to
the same Resource Domain as the relevant RAID Group, and only
the Eco-mode schedules that are assigned to the Shared Resource,
are displayed in the list box.