Filter
Top Products
Chapter 6 Settings Menu
> 6.4 SNMP
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
501
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
6.4.1.2 Disable SNMP Agent Environment
This section explains how to disable the SNMP Agent environment.
Procedure
1 Click [Set SNMP Agent Environment] under SNMP in the [Settings] menu.
→ The [Set SNMP Agent Environment (Initial)] screen appears.
Refer to "A.28.1 Set SNMP Agent Environment (Initial) Screen" (page 782) for screen
details.
2 Set the following item and click the [Set] button.
• SNMP Function Setting
Disables the SNMP Function.
→ The [Set SNMP Agent Environment (Setting Check)] screen appears.
When the SNMP Function is [Disabled], all SNMP Agent
Environment settings in the ETERNUS DX400/DX8000 series will be
deleted. Even if [SNMP Agent Configuration Setting], [Device Unique
Information], [Transfer Authentication Error] and/or [Report abnormal
status of parts while maintenance work (MIB)] values are entered via
ETERNUSmgr, they will not be set in the ETERNUS DX400/DX8000
series.