Filter
Top Products
Chapter 5 Configuration Menu
> 5.1 Resource Domain Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
130
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
3 Change the Assigned Domain of the Affinity Group, and click the [Set] button.
■ To set using [Set Range]
(1)Enter the first and last Affinity Group numbers.
(2)Select the domain to assign the specified range of the Affinity Groups from the list box.
(3)Click the [Execute] button.
(This screen is displayed when logged on the ETERNUS DX400/DX8000 series in
which the Resource Domains are registered using a Total Administrator account.)
• If logged on using a user account that does not support the "Host
Settings - Open", the [Affinity Group] link is not displayed.
• If there are no Affinity Groups registered in the ETERNUS DX400/
DX8000 series that can be assigned to domains, the [Suppress
Function] screen appears. Click the [OK] button to return to the
[Assign Resources (Select Resource)] screen.
• The domain of a Concatenated Affinity Group [0xXXX-0xYYY] is
changed only when the first Affinity Group number [0xXXX] is
included in the specified range. The domain is not changed even
if the second Affinity Group number [0xYYY] is included in the
specified range.
• If the [Execute] button is clicked in the following c onditions, an
error screen appears.
- Both or one of the "From: Affinity Group#" or "To: Affinity
Group#" field is blank
- Characters other than hexadecimal numbers are spec ified in
the "From: Affinity Group#" or "To: Affinity Group#" field
- There are no Affinity Groups where the Assigned Domain can
be changed in the range specified by the "From: Affinity
Group#" and "To: Affinity Group#"