Filter
Top Products
Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
396
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
2 Select the CA Port to copy LUN Mapping (copy source), and click the [Copy]
button.
→ The [Set LUN Mapping (Copy Destination CA Port Selection)] screen appears.
• When the [Copy] button is clicked without selecting a CA Port, an
error screen appears.
• When the [Copy] button is clicked with no copy destination CA
Port installed, which the same type as the copy source CA Port
and whose Host Affinity is disabled, an error screen appears.
• When logged on using a Resource Domain Administrator
account, the volumes that are not assigned to the relevant
Resource Domain are not copied. After executing the copy, the
volume area (Volume#) for the relevant volume in the Copy
Destination Mapping information goes blank.
• "FC8G" indicates FC with a maximum transfer speed of 8Gbit/s.
• [Set LUN Mapping] is available when the [Affinity Mode] of the
target FC-CA Port or iSCSI-CA Port is [OFF (Disabled)]. Copy
destination check boxes are only displayed f o r F C - C A o r i S C S I -
CA Ports whose [Affinity Mode] is [OFF (Disabled)].