Filter
Top Products
Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
440
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
3 Select the mode to change, and click the [Set] button.
→ The [Change RA Mode (Change RA Mode Check)] screen appears.
When the [Set] button is clicked without selecting CA Port, an error
screen appears.
• When the RA mode is changed from "CA" to "RA", or "RFCF-RA",
the mapping information will be deleted.
When changing the CA Port Mode of a live CA Port, it is
necessary to stop the host access to the CA Port to be changed.
• When the RA mode is changed from "RA" to "CA", or "RFCF-RA",
the FC-RA path information will be deleted.
When changing the RA Port Mode of a live RA Port, it is
necessary to stop the session of the RA Port to be changed.
• When the RA mode is changed from "RFCF-RA" to "CA", or "RA",
the RFCF-RA path information will be deleted.
When changing the mode for RFCF-RA port in operation, make
sure to stop the RFCF-EX for the RFCF-RA port to be changed.
• If the RA mode is changed from "CA" or "RA " t o " R F C F - R A " , t h e
pair port mode of the selected port is automatically changed to
"RFCF-RA". "Pair port" indicates Port#0 and Port#1, or Port#2
and Port#3.
• If the RA mode is changed from "RFCF-RA" t o " C A " o r " R A " , t h e
pair port mode of the selected port is automatically changed to
"CA".
• If the [Set] button is clicked when the RFCF-RA port number
exceeds 32, an error screen appears.
• For the ETERNUS DX8700, if the [Set] button is clicked when the
"RFCF-RA" mode is specified to Port#2 or Port#3, an error
screen appears.