Chapter 5 Configuration Menu
> 5.3 Thin Provisioning Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
260
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
5 Input the additional RAID Group settings, select all the disk drives that configure
the RAID Group, and click the [Set] button.
Specify the following RAID Group settings:
• RAID Group Name
• Controlling CM
• Disk drive
→ The [Create/Extend Thin Provisioning Pool (RAID Group Settings in Pool)] screen
appears.
When adding multiple RAID Groups in the Thin Provisioning Pool, repeat Step 4 and Step
5 as required.
After adding RAID Groups to the Thin Provisioning Pool completes, move on to Step 6.
Restrictions for disk layout varies depending on the RAID level of the RAID Groups added
in the Thin Provisioning Pool. Refer to
"Restrictions for Disk Layout" (page 253) for details.