Filter
Top Products
Appendix A Screen Details
> A.31 Set Thin Provisioning Pool-Eco-mode
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
794
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
- [Eco-mode Schedule] radio button
Specify the setting method (ON/OFF only, Schedule only, or Both) for range specification
(Default: Unselected).
• ON/OFF only
Only whether the Eco-mode is on or off is set for the target Thin Provisioning Pool.
• Schedule only
Only the Eco-mode schedule is set for the target Thin Provisioning Pool.
• Both
Both whether the Eco-mode is on or off and the Eco-mode schedule are set for the
target Thin Provisioning Pool.
• Manual setting
- [Eco-mode Schedule (ON/OFF)] check box
Select ON/OFF of Eco-mode schedule for the target Thin Provisioning Pool.
If this box is checked, the Eco-mode schedule is ON. If this box is not checked, the Eco-
mode schedule is OFF.
- [Eco-mode Schedule (Schedule)] list box
Select the Eco-mode schedule for the target Thin Provisioning Pool.
● Displayed contents
• Disk Status
Disk status of the target Thin Provisioning Pool is displayed.
- active
- idle
- in the boot process
- in the stop process
• Control Status
[-] (hyphen) is displayed.
Refer to "A.4.1 Thin Provisioning Pool List (Pool List) Screen" (page 676)
for other Thin
Provisioning Pool list items.
When Resource Domains are registered in the ETERNUS DX400/
DX8000 series, only the Eco-mode schedules that are assigned to the
same Resource Domain as the relevant TPP and the Shared Resource,
are displayed in the list box.
Access to the disks under [in the boot process] or [in the stop process] is
not allowed.