Filter
Top Products
Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
386
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
4 Click the [OK] button.
→ Displays the [Allocate Host-Affinity Group (Copy Progress Check)] screen. After the
process is successfully complete, the [Allocate Host-Affinity Group (Copy Result)]
screen appears.
- When logged on using a Resource Domain Administrator
account, the ETERNUS DX400/DX8000 series deletes the
Host-Affinity Groups, which are configured with the hosts and
Affinity Groups in the relevant Resource Domain, in the copy
destination CA port. The ETERNUS DX400/DX8000 series
will then copy the Host-Affinity Groups, which are configured
with hosts and Affinity Groups in the relevant Resource
Domain, in the copy source CA port to the copy destination.
When the number of Host-Affinity Groups in the copy
destination CA port exceeds 64 if copy is performed, the
checkbox is not displayed for the relevant copy destination CA
port.
- When logged on using a Resource Domain Administrator
account, if the same host information exists in the copy source
and destination CA ports, and if the host information is allo-
cated to an Affinity Group that is assigned to a different
Resource Domain from the Resource Domain to which the
current user account is allocated, the checkbox is not
displayed for the relevant copy destination CA port.