Filter
Top Products
Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
441
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
4 Click the [OK] button.
→ Displays the [Change RA Mode (Updating Configuration Information)] screen. After the
process is successfully completed, the [Change RA Mode (Setting Result)] screen
appears.
5 Click the [OK] button.
→ Returns to the [Change RA Mode (Initial)] screen.
End of procedure
5.4.11.2 Copy RA Mode
This section explains procedures to copy RA mode.
Procedure
1 Click [Change RA Mode] under the Host Interface Management in the
[Configuration] menu.
→ The [Change RA Mode (Initial)] screen appears.
When changing "RA" to "CA", or "RFCF-RA", if the FC-RA path
information exists, the [Change RA Mode (FC-RA Path Configuration
Information is Being Deleted)] screen is displayed before the
[Change RA Mode (Updating Configuration Information)] screen is
displayed.