Fujitsu DX400 Computer Drive User Manual


 
Chapter 5 Configuration Menu
> 5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
202
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
3 Select the volumes or a range of volume to be changed and click the [Set]
button.
The three methods below show how to specify the volume to be changed.
A concatenated volume is changed by the concatenated volume units.
Individual (multiple selections can be made)
Select the volume to be encrypted from the Logical Volume list.
Range (Mainframe)
Enter the first and last volume numbers to be changed in the From/To fields.
Volumes with checkboxes in the specified range can be changed.
Mainframe Volumes, MVV Volumes, and MVV Concatenated Volumes can be
changed.
Range (Open)
Enter the first and last volume numbers to be changed in the From/To fields.
Volumes with checkboxes in the specified range can be changed.
Open Volumes, Snap Data Volumes, Open Concatenated Volumes, MVV Volumes,
and MVV Concatenated Volumes can be changed.
The [Convert Encryption Volume (Check Execution)] screen appears.
When any of the following operations are being executed,
encryption cannot be used. (Checkbox is not displayed). Perform
the encryption after the executing operation has been completed.
- Format
- RAID Migration
- Logical Volume in the RAID Group where LDE is being
executed
Snap Data Pool Volumes cannot be encrypted. For a Snap Data
Pool Volume, a checkbox is not displayed.
Thin Provisioning Volumes cannot be encrypted. For a Thin
Provisioning Volume, a checkbox is not displayed.
Temporary Volumes cannot be encrypted. For a Temporary
Volume, a checkbox is not displayed.