Filter
Top Products
Chapter 6 Settings Menu
> 6.5 Eco-mode
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
523
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
The following explains the setting procedures for the RAID Group-Eco-mode.
The following functions can be set using this menu.
• Batch setting of Eco-mode schedule in the RAID group
• Manual setting of Eco-mode schedule in the RAID group
Procedures for each operation are described below.
6.5.3.1 Batch setting of Eco-mode schedule in the RAID group
This section describes operating procedure for batch setting of Eco-mode schedule in the RAID
group.
Procedure
1 Click [Set RAID Group-Eco-mode] under the Eco-mode in the [Settings] menu.
→ The [Set RAID Group-Eco-mode (Set)] screen appears.
Refer to "A.30.1 Set RAID Group-Eco-mode (Set) Screen" (page 790)
for screen
details.
2 Set the following items in the [Set RAID Group-Eco-mode] and click the
[Execute] button.
• From RAID Group#
Set the RAID group number to be the start position in the batch setting of the Eco-mode
schedule range.
• To RAID Group#
Set the RAID group number to be the end position in the batch setting of the Eco-mode
schedule range.
• [Eco-mode Schedule (ON/OFF)] check box
Selects ON/OFF of the Eco-mode schedule to be set in the specified range.
• [Eco-mode Schedule (Schedule)] list box
Selects the Eco-mode schedule to set to the specified range.
• [Eco-mode Schedule] radio button
Selects the setting target.