Filter
Top Products
Appendix A Screen Details
> A.5 Volume List
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
683
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
- Available
The relevant volume is in normal status.
- Broken
The relevant volume is broken. ("Broken" is displayed in red characters.)
- Exposed
The RAID Group to which the relevant volume belongs lost redundancy due to disk failure.
- Partially Exposed
One of the disks in the RAID Group to which the relevant volume belongs failed (only for
RAID6).
- Copyback
Copyback or Redundant Copy is in progress in the RAID Group to which the relevant
volume belongs.
- Readying
The relevant volume is not formatted.
- Rebuild
Rebuild is in progress in the RAID Group to which the relevant volume belongs.
- Spare in Use
The RAID Group to which the relevant volume belongs manages the redundancy of the
group using a HS.
- Not Ready
The RAID Group to which the relevant volume belongs is blocked.
- Partially Exposed Rebuild
A disk in the RAID Group to which the relevant volume belongs failed, and rebuilding is in
progress (only for RAID6).
- Exposed Rebuild
Two disks in the RAID Group to which the relevant volume belongs failed, and the
rebuilding of one of them is in progress (only for RAID6).
• Volume Type
The volume type is displayed.
- Open Volume:
Open
- Snap Data Volume:
SDV
- Snap Data Pool Volume:
SDPV
- Thin Provisioning Volume:
TPV
- TmpOpen Volume:
TmpOpen (*1)
- Temporary Volume:
Temporary (*2)
- Mainframe Volume:
F6427G, F6427H, or F6427K
- MVV Volume:
MVV(G), MVV(H), or MVV(K)
*1: Concatenation destination volume when LUN Concatenation is in progress.
*2: Migration source volume that fails to be deleted after RAID Migration has been completed, or work
volume that fails to be deleted after TPV balancing.