Filter
Top Products
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
3
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
Preface
This guide provides a variety of basic information about ETERNUSmgr for the ETERNUS
DX410/DX440 and ETERNUS DX8100/DX8400/DX8700
.
It should be referred to when ETERNUSmgr is used to monitor, set up and maintain ETERNUS
DX410/DX440 and ETERNUS DX8100/DX8400/DX8700 (hereafter also referred to as "ETER-
NUS DX400/DX8000 series" or "device").
Operation management software other than ETERNUSmgr can be also used to monitor the
ETERNUS DX400/DX8000 series. The ETERNUSmgr backend program, which is embedded in
the
ETERNUS DX400/DX8000 series, is used to display the status of, setup and maintain the
ETERNUS DX400/DX8000 series. In this guide, function of the ETERNUSmgr backend program
is also referred to as "ETERNUSmgr".
This guide is specially written for ETERNUSmgr administrators and operators.
Knowledge of UNIX or Windows® system administration and Web server administration are
required to understand this guide.
This guide is written for controller firmware version V20L5x. Some of the functions herein may
not be supported for firmware version V20L4x.
Second Edition
August 2010
Structure of This Manual
This manual consists of the following nine chapters and three appendixes.
● Chapter 1 Operation Screens
This chapter explains the operation windows of ETERNUSmgr.
● Chapter 2 Logon/Logoff
This chapter describes the logon and logoff procedures for the ETERNUSmgr.
● Chapter 3 Status Menu
This chapter describes the various physical and logical status screens.
● Chapter 4 Getting Started Menu
This chapter describes the Getting Started menu's various submenus and their functions.
● Chapter 5 Configuration Menu
This chapter describes the various RAID group and host connection settings.
● Chapter 6 Settings Menu
This chapter describes the Setting menu's various submenu settings.