Filter
Top Products
Appendix A Screen Details
> A.6 Advanced Copy Status
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
695
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
■ Extent Information
● Displayed contents
• Offset
A copy number in specified range is displayed in 0 – 2048 (decimal number).
• Source LBA
The copy source Start LBA (Logical Block Address) in the specified range is displayed in 16-
digit hexadecimal.
• Destination LBA
The copy destination Start LBA (Logical Block Address) in the specified range is displayed in
16-digit hexadecimal.
• Extent Block
The number of data blocks in the specified copy range is displayed in decimal.
Units for each volume type are as follows:
- Open Volume: Block
- Mainframe Volume: Track
A.6.4 Advanced Copy Status (REC Session List) Screen
This screen displays the status of REC sessions.
When Resource Domains are registered in the ETERNUS DX400/DX8000 series, the displayed
REC sessions differ depending on the current user account.
When logged on using a Total Administrator account, all the active REC sessions are displayed.
When logged on using a Resource Domain Administrator account, the active REC sessions in
the ETERNUS DX400/DX8000 series in which the copy source or copy destination volume is
registered in the relevant Resource Domain, Shared Resource, or volumes that cannot be
assigned to the Resource Domains, are displayed.
When Resource Domains are not registered, all the active REC sessions are displayed.
■ REC Session List
● Displayed contents
• SID
The session ID (0x0000 – 0xFFFF) of this device is displayed in hexadecimal number.
Clicking the [SID] link displays the [REC Session Details] screen. However, when [Reserve] is
displayed for [Status], a link is not displayed.
• Remote SID
The session ID (0x0000 – 0xFFFF) of another device which is remotely connected with this
device is displayed in hexadecimal number.