Filter
Top Products
Appendix A Screen Details
> A.18 Set CA Parameters
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
749
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
● Setting item
• TCP/IP Setting
- IP Address
Set the IP Address of the iSCSI-CA Port (required).
Numeric characters from 1 to 3 (the first part: 1 to 255, others: 0 – 255) are entered in all
text boxes.
As a default, "192.168.1.xxx" is displayed.
(xxx: The value decided from the iSCSI-CA Port module ID and the port number)
- Subnet Mask
Set the Subnet Mask of the iSCSI-CA Port (required).
Numeric characters from 1 to 3 (0 to 255) are entered in all textboxes.
The default setting is "255.255.255.0".
- Gateway
Set the Gateway of the iSCSI-CA Port.
Numeric characters from 1 to 3 (0 to 255) are entered in all textboxes.
The initial status is blank.
- iSNS Server
Set the iSNS server of the iSCSI-CA Port to either ON (Enabled) or OFF (Disabled).
The default setting is "OFF (Disabled)".
iSNS (Internet Storage Name Service) is an equivalent to the DNS (Domain Name
System) for the Internet. The iSNS server is used to convert the iSCSI names into IP
addresses.
- iSNS Server IP Address
Set the iSNS Server IP Address of the iSCSI-CA Port in numerals 0 – 255.
The initial status is blank.
• iSCSI Setting
- iSCSI Name
Set the iSCSI Name for the iSCSI-CA Port (required).
Alphanumeric characters, [-] (hyphen), [;] (colon), and [.] (period) can be used.
iSCSI Name is a unique name corresponding to the network address specified in the TCP/
IP Setting of each iSCSI-CA Port. By setting iSCSI Name and network address
individually, the ETERNUS DX400/DX8000 series can have unique identifiers in the
network regardless of the location. Using this iSCSI Name, the host can detect the
destination device even when the network address has changed.
The default of the iSCSI Name is the ETERNUS DX400/DX8000 series iSCSI Name.
When re-setting the ETERNUS DX400/DX8000 series iSCSI Name in [iSCSI Name], click
the [Default] button.
The ETERNUS DX400/DX8000 series iSCSI Name is displayed in ( ) on the bottom of the
[Default] button.
This is enabled only when [ON] is selected for the iSNS Server setting.
The iSCSI Name is a unique name in the ETERNUS DX400/DX8000
series. The same iSCSI Names cannot be set in multiple iSCSI-CA
Ports except the ETERNUS DX400/DX8000 series iSCSI Name.