Filter
Top Products
Chapter 5 Configuration Menu
> 5.1 Resource Domain Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
139
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
3 Change the Assigned Domain of the Eco-mode schedule, and click the [Set]
button.
■ To set using [Set Range]
(1)Enter the first and last Eco-mode schedule numbers.
(2)Select the domain to assign the specified range of the Eco-mode schedule from the list
box.
(3)Click the [Execute] button.
(This screen is displayed when logged on the ETERNUS DX400/DX8000 series in
which the Resource Domains are registered using a Total Administrator account.)
• If logged on using a user account that does not support the "Eco-
mode", the [Eco-mode Schedule] link is not displayed.
• If there are no Eco-mode schedules registered in the ETERNUS
DX400/DX8000 series that can be assigned to domains, the
[Suppress Function] screen appears. Click the [OK] button to
return to the [Assign Resources (Select Resource)] screen.
If the [Execute] button is clicked in the following conditions, an error
screen appears.
• Both or one of the "From: Eco-mode Schedule#" or "To: Eco-
mode Schedule#" field is blank
• Characters other than hexadecim al numbers ar e specified in the
"From: Eco-mode Schedule#" or "To: Eco-mode Schedule#" field
• There are no Eco-mode schedules where the Assigned Domain
can be changed in the range specified by the "From: Eco-mode
Schedule#" and "To: Eco-mode Schedule#"