Filter
Top Products
Chapter 5 Configuration Menu
> 5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
171
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
5.2.6.1 Create Thin Provisioning Volumes
This section explains procedures to create Thin Provisioning Volumes.
Procedure
1 Click [Create Logical Volume] under the Thin Provisioning Management in the
[Configuration] menu.
→ The [Create Logical Volume (Initial)] screen appears.
2 Click the [Create Thin Provisioning Volume] link to start creating a Thin
Provisioning Volume.
→ The [Create Logical Volume (Select Pool)] screen appears.
• When there is no Thin Provisioning License registered, the
[Create Thin Provisioning Volume] link does not appear.
• When the maximum number of volumes has already been
created in the device, the [Create Thin Provisioning Volume] link
does not appear. To create a new Thin Provisioning Volume,
please delete volumes first using the [Delete Logical Volume]
function, and then, re-execute [Create Logical Volume].
If the [Create Thin Provisioning Volume] link is clicked in the
following conditions, the suppress function screen appears. Click the
[OK] button to return to the [Menu] screen.
• When there is no Thin Provisioning Pool that can create Thin
Provisioning Volumes in the ETERNUS DX400/DX8000 series
• When the maximum capacity of Thin Provisioning Volumes are
already registered