Filter
Top Products
Chapter 5 Configuration Menu
> 5.1 Resource Domain Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
113
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
■ To select an individual RAID Group
(1)Select the domain to assign the relevant RAID Group from the RAID Group List using
the list box.
(This screen is displayed when logged on the ETERNUS DX400/DX8000 series in
which the Resource Domains are registered using a Total Administrator account.)
→ The [Assign Resources (Check RAID Group Settings)] screen appears.
A list box is displayed for the RAID Group where the Assigned
Domain can be changed. For RAID Groups where the Assigned
Domain cannot be changed, domain information is displayed in
text format.
When the Assigned Domain for the RAID Group is changed, the
Assigned Domain for Open Logical Volumes (Open and SDV) in the
relevant RAID Group is also changed. Domains for migration source
volumes (Temporary volumes), which fail to be deleted after RAID
Migration is complete, or domains for concatenated volumes in the
relevant RAID Group, are also changed. If the total number of
Logical Volumes (Open, SDV, Temporary, Concatenated Volume,
and TPV) in the domain exceeds the maximum number specified
using the [Assign Numerical Resource] function, an error screen
appears.