Filter
Top Products
Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
423
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
6 Click the [OK] button.
→ Returns to the [Menu] screen.
End of procedure
5.4.9.3 Delete LCU
Procedure
1 Click [Set LCU] under the Host Interface Management in the [Configuration]
menu.
→ The [Set LCU (Initial)] screen appears.
If setting the IOA Mapping, click the [Set IOA Mapping] link.
• If an LCU is deleted, the connection between t h e O C L I N K P o r t o r
FCLINK Port and the IOA Mapping information will be also deleted. If
deleting an LCU during operation, stop the host access to the OCLINK
Port or FCLINK Port assigned to the LCU.
• If an LCU is deleted, the connection between the IOA Mapping
information and the LCU will be also deleted.
• If the RFCF-RA path is set, that LCU cannot be deleted.