Filter
Top Products
Appendix A Screen Details
> A.19 Set Host World Wide Name(s)
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
756
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
A.19 Set Host World Wide Name(s)
A.19.1 Set Host World Wide Name(s) (Initial) Screen
On this screen, the list of WWNs (Host World Wide Names) is displayed. Addition/deletion of
WWN(s) is carried out on this screen.
When Resource Domains are registered in the ETERNUS DX400/DX8000 series, the displayed
WWNs differ depending on the current user account.
When logged on using a Total Administrator account, all the WWNs that are assigned to
Resource Domains are displayed. When logged on using a Resource Domain Administrator
account, only the WWNs that are assigned to the relevant Resource Domain, and only the
WWNs that are
assigned to the Shared Resource, are displayed.
When Resource Domains are not registered, all the WWNs registered in the ETERNUS DX400/
DX8000 series are displayed.
When no Resource Domains are registered in the ETERNUS DX400/DX8000 series, or when
logged on
using a Total Administrator account, refer to "Number of WWNs/Affinity Groups/Host-
Affinity Settings which can be registered" (page 327) for the maximum number of WWNs which
can be registered for the device.
■ Host WWN List
● Displayed contents
• Checkbox
This is used to delete WWN.
• Host Table No.
Identification number (000 – 3FF) for every WWN is displayed.
Used for allocating a WWN to CA.
• Host Table Name
Host Table name for every WWN is displayed within 16 characters.
If the Host Table name is not specified, the field is blank.
• Host World Wide Name
WWNs are displayed.
• Resource Domain No.
The Resource Domain number (0x00 – 0x07) to which the WWN belongs is displayed.
If the WWN is a Shared Resource, [-] (hyphen) is displayed.
• Resource Domain Name
The Resource Domain name to which the WWN belongs is displayed within 16 characters.
If a Resource Domain name is not specified, the field is blank.
If the WWN is a Shared Resource, [Share] is displayed.
• Host Response
The Host Response added to each WWN is displayed.
Select adequate Host Response from the list box, if you change it.