Filter
Top Products
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
669
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
Appendix A Screen Details
This chapter describes the functions of the Screen Details.
A.1 Device Status
A.1.1 Device Status (Collect Device Information) Screen
On this screen, you can get information for all the disk drives installed in the ETERNUS DX400/
DX8000 series
, totally or separately.
Clicking the [Detail] button on the [Base Rack] screen jumps to this screen. After acquisition is
completed, the screen jumps to the [Device Status (Save Device Information)] screen
automatically.
The device information which can be acquired is as follows.
● Displayed contents
• Batch acquisition
Clicking the [Batch acquisition] link acquires Device iSCSI Name information, information
about all CAs installed in the device, and information about all disks, including the disks that
are installed in the [Expansion Rack]. The file name is "device.txt".
- Device iSCSI Name information
- CA information
- Disk information
For details, refer to "Individual acquisition" (page 669)
.
• Individual acquisition
- Device iSCSI Name information
Clicking the [Device iSCSI Name] link acquires the device iSCSI name. The file name is
"iscsiname.txt".
- CA information
Clicking the [All CA] link acquires the following information about CA installed in the device
at once. The file name is "calist.txt".
• Location information (CM#x CA#y)
• CA type (FC 4port, etc.)
• Port
• WWN (FC, FCLINK only)