Filter
Top Products
Appendix A Screen Details
> A.26 Set Advanced Copy Table Size
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
777
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
A.26 Set Advanced Copy Table Size
A.26.1 Set Advanced Copy Table Size (Initial) Screen
The Advanced Copy table size and resolution registered in the device are displayed on this
screen. When changing the value, select the appropriate value from the list box by taking the
amount of copy data and the number of active sessions into consideration.
● Setting item
• Table Size
Select the Advanced Copy table size from the list box.
- 0: copy function not supported (Default)
- ETERNUS DX410/DX440: 0 – 136(MB) (integer multiples of 8)
- ETERNUS DX8100: 0 – 136(MB) (integer multiples of 8)
- ETERNUS DX8400/DX8700: 0 – 528(MB) (integer multiples of 8)
• Resolution
Select bitmap resolution (the size can be mapped by 1 bit) from the list box.
Select the resolution "1" (x1) as the standard resolution 8 (KB/bit).
- Resolution: x1 (Default), x2, x4, x8, x16
When using REC, set the "Resolution" of the devices which will become
copy source / copy destination to the same value.