Filter
Top Products
Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
314
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
[Reset Scope]
Select the Reset Scope for the iSCSI-CA Port from [I_T_L] or [T_L].
[Reserve Cancel at Chip Reset]
Select ON (Enabled) or OFF (Disabled) for the Reserve Cancel setting of the iSCSI-CA
Port Chip Reset.
[CmdSN Count]
Select the number of commands that can be accepted from the host at the same time
for the iSCSI-CA port. It is not necessary to change this default setting (Unlimited) for
normal use.
[Header Digest]
Select the Header Digest for the iSCSI-CA Port from [OFF] or [CRC32C].
[Data Digest]
Select the Data Digest for the iSCSI-CA Port from [OFF] or [CRC32C].
→ The [Set CA Parameters (iSCSI-CA Detailed Settings Check)] screen appears.
• By clicking the [Host Response List] link of the [Affinity Mode],
the Host Response List can be checked.
• By clicking the [Host Response No.] link on the [Set CA
Parameters (Host Response List)] screen, the settings of the
selected Host Response will be displayed.
• Details of the sense code conversion can be checked from the
[Detail] button of the Sense Code Conversion Pattern.