Chapter 6 Settings Menu
> 6.2 Sub System Parameter
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
452
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
6.2 Sub System Parameter
6.2.1 Set Sub System Parameters
On this screen, set sub system parameters.
"Sub system parameters" are the ETERNUS DX400/DX8000 series specific information that
controls
ETERNUS DX400/DX8000 series when connecting to hosts. Required sub system
parameters vary depending on the types of hosts to connect to. When multiple hosts are con
-
nected to the ETERNUS DX400/DX8000 series, the ETERNUS DX400/DX8000 series operates
for the hosts in accordance with these sub system parameters.
[Set Sub System Parameters] provides functions to set these sub system parameters while the
ETERNUS DX400/DX8000 series is running.
The following explains the setting procedures for sub system parameters.
Procedure
1 Click [Set Sub System Parameters] under the Sub System Parameter in the
[Settings] menu.
→ The [Set Sub System Parameters (Initial)] screen appears.
Refer to "A.24.1 Set Sub System Parameters (Initial) Screen" (page 773) for screen
details.
2 Set the sub system parameters to be changed, and click the [Set] button.
→ The [Set Sub System Parameters (Setting Check)] screen appears.
To set the sub system parameters using this function, set them after
stopping all host access.