Filter
Top Products
Chapter 5 Configuration Menu
> 5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
223
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
• In the following cases, it is necessary to export log information
and contact your maintenance engineer.
After contacting your maintenance engineer, take appropriate
measures.
- When an error is detected during the RAID Migration start
process and the process cannot be continued:
→ The [RAID Migration (Start Deleting Work Volume)] screen
appears.
Click the [OK] button to delete the work volume.
- When a process failure occurs during deletion of the work
volume:
→ The [RAID Migration (Start Deleting Work Volume Failure)]
screen appears.
Click the [OK] button to delete the work volume using
[Delete Logical Volume] function.
• If the migration destination is TPP, and the used capacity of the
relevant TPP is in alarm state (exceeding "Caution" or "Warning"
threshold) after the migration has been completed, a message to
recommend expanding the relevant TPP capacity appears.
• If an unencrypted volume is migrated to an encrypted TPP, the
volume cannot be returned to unencrypted status. When
performing migration from unencrypted volumes to encrypted
volumes, the caution message is displayed.
When Resource Domains are registered in the ETERNUS DX400/
DX8000 series, work volume is assigned to the same Resource
Domain as the migration source volume.